On board air compressors for quick and easy access for all your toys or the van itself!
5.5 gallon Propane system installed under the van would support LP stove. Pending availability.
14″ X 14″ square sink with stand alone faucet and pull out spray handle.
2 Burner LP Stove with flush mount black glass top lid. Runs off LP system mounted under the van.
Stand alone stereo systems installed in the rear of the van with completely separate audio equipment from main vans system.
Aftermarket head units to replace and/or upgrade your vans existing system. Available with touch support.
6.5” or 7” Kenwood/Alpine Double Din touch screen headunit with Nav, bluetooth and aux input. Steering wheel control if applicable.
Extend the width of your van with sleeping pods. Be able to sleep side to side in the Sprinter by extending the overall width in the rear ¼ panels of the van.
Extension deck for extended sleeping area in rear. Extends available sleeping area when paired with sofa sleeper unit.
3 Passenger sofa sleeper with adjustable headrests and 3 lap belts. Installed on Quick Release brackets. Easily expand your sleeping area with an optional extension deck.
Solid Fixed Platform built from 1” steel tube frame powder koated with 3/8” plywood top covered with Interweave material.
Adjustable height fold up/down bunks. 1” steel tube frame powder koated with 3/8” plywood top covered with Interweave material. Reinforcement For Mac track needed behind the walls and Mac Track running vertical in the van from top to bottom of desired platform height.
Side facing seating with room for 4 people. Folds into a bed quick and easy. Length to be determined by conversion and/or length needed by customers for sleeping. Storage below dinettes if possible and not used by conversion components. No belts available for seating additional passengers.
A Van Specialties original design. Free spanning bed system that is quick release and removable. Multiple configurations possible. Reinforcement needed depending on the height desired in the van. Options on dropping the bed system to be able to rest on the wheel tub boxes for a second height if installed in the van.
4 Stage 45 amp battery charger to charge batteries when plugged into shore power.
Expion 360 EX-100C-27 100 a/h LIFEPO4 batteries with Expion DC – DC charger , system installed in the Van. With Expion 360 Battery Monitor , heavy duty battery disconnect and battery tie downs with heater blanket for batterie(s).
Command area for the interior components of the van. Controls for lights, heater, solar panel, water pump and other items you may have in your custom conversion.
Custom built aluminum cross bars to be able to mount 100 watt solar panels to the roof.
120vac power on the outside of the van is not a problem with exterior 120vac outlet. Plug in anytime without even having to open your van up to get to the inside.
Shorepower inlet to be able to plug your van in to be able to charge your batteries with the battery charger and have 120vac on the inside of the van.
Custom van running boards in a variety of styles, full length running boards, aluminum running boards and more.
Variety of awnings based on your needs and your model, includes Fiamma F65 and Fiamma F80s variants. Installable with or without roof rails on your van.
Aluminum side ladder to be able to access roof top cargo box or other gear on the roof of the van. Available driver side only.
Rear Door Ladder with extended bump stop. Mounted to the rear door of the van to be able to access the roof to be able to get to cargo or gear secured to the roof.
7-10 gallon Grey water holding tank for the waste water for the van. Perfect add for the RV camper of your dreams.
Fiamma F 65 awning for the 07 to current Sprinter and Promaster. Multiple lengths and colors available depending on the size and color of your van.
Installable with or without roof rails on your van.
Fiamma F 45awning for 02-06 Sprinter, Ford E-series with or without SMB pop-top, Chevy X-press and fiberglass hi-tops.
4.6 cu. Ft. fridge with Danfoss compressor. Available in black with laminate face to match or Stainless face. Powered AC/DC
3.0 cu. ft. Fridge with Danfoss compressor. Available in black with laminate face to match or Stainless face. Powered AC/DC
2.3 cu. ft. Fridge with Danfoss compressor. Stainless face. Powered AC/DC
Espar S-3 Cabin Heat and Hot Water. Gas and Diesel version available.
Fresh water system, minimum of 10 gallon with max of 20 gallon, powder coated fill and city water fill. Box to enclose included.
Espar S-3 Cabin Heat and Hot Water. Gas and Diesel version available.
Webasto AT 2000 cabin air heater runs off the factory fuel tank and Aux battery system. Digital thermostat for cabin heat temp setting. Small compact design with huge output for cabin heat in the van.
Fantastic and Maxxair roof vents with optional 3 speed forward and reverse functions. Electric fans are a great way to keep your van cool and supplied with ample amounts of fresh air.
Stay cool in the summer heat with 11.5BTU roof A/C unit. Lo-Profile sleek design to not only look cool but keep you cool also.
Custom 2 tone interior color schemes, available in a wide variety of options…please inquire for more details.
Side facing seating with room for 4 people. Storage below dinettes if possible and not used by conversion components. No belts available for seating additional passengers. (Optional bed conversion)
Interweave Interior, headliner, sidewalls, door panels and trim, insulated thru out the van on either 144” or 140” wheel base van.
Upgrade your galley cabinet with a variety of custom counter top options. Options include but are not limited to stainless steel, butcher block, corian counter tops, and more…
Personalize your interior with custom cabinet accent pieces, available in just about any color!
Custom Diamond Plate back splash for the galley area. Powder koated to match the rest of the interior metal work.
Side facing seating with room for 4 people. Folds into a bed quick and easy. Length to be determined by conversion and/or length needed by customers for sleeping. Storage below dinettes if possible and not used by conversion components. No belts available for seating additional passengers.
Passenger side solid fixed window installed in the rear ¼ panel
Driver side Tip Out or T-vent window installed in the rear ¼ panel.
Opposite sliding door window installed, Tip Out or T-vent depending on the van
Sliding door window installed, Tip Out or T-vent depending on the van
Don’t see what you are looking for? No problem customizing vans is our specialty, the options above are just a few of our most popular van options, contact us direct to see if we can help!